Pseudo-precision system for row crops, maize / sunflowers
T-ForcePlus 750
T-ForcePlus 750
With a working width of 7.2 or 7.5 meters and a power requirement from 300 hp, the 750 is designed to take productivity and efficiency to a new level. It enables precise seed placement even under demanding conditions and helps to significantly reduce operating costs.
The new chassis concept impresses with its robustness and practicality: a reinforced frame, an optimized folding system and well thought-out details such as easily accessible hoppers, stable ladders and integrated tool boxes make work easier and safer.
The T-ForcePlus 750 is therefore the perfect choice for businesses that think big and want to operate sustainably in the long term.
The T-SlotPlus system from Novag ensures optimum seed placement and therefore reliable yields, even in difficult no-till conditions. The special T-slot shape is created by a vertical disc and two T-shaped Seed blades, which place the seed and fertilizer separately to the side.
Lots of pressure, but intelligently
Soil resistance varies greatly – due to compaction, stones or changing soil types. The IntelliForcePlus system automatically adjusts the coulter pressure for a constant sowing depth, especially with no-till.
Sensors on the Press wheels measure the resistance, hydraulic cylinders regulate the pressure individually for each opener (up to 500 kg and 430 mm stroke). Thanks to the parallelogram, each opener always remains stable and in precise contact with the ground
The large main hopper of the T-ForcePlus 650 and 750 has a capacity of 5,400 liters and is divided into two separate compartments that ensure reliable separation of seed and fertilizer.
The volume distribution can be flexibly adjusted as required – either 55 / 45 % or 33 / 66 %. This allows the ratio to be optimally adapted to different crops, seed quantities or fertilizer strategies.
Both chambers can convey their products to each openers independently of each other – whether on the front or rear seed bar. This means that combined applications such as seed + fertilizer or two different crops are also possible without any problems.
As an option, up to two 120-liter additional tanks can be mounted at the rear, for example for fine seeds, slug pellets or micro-granules.
This means that a total of up to four different products can be spread simultaneously.
All metering units are driven by hydraulic motors, which promises constant performance – even at low speeds, without overheating or loss of torque. The calibration process is fast, precise and intuitive – in line with modern, efficient direct seeding technology.
The generously dimensioned fan is equipped with an oil cooler / air warmer, which ensures a strong & dry air flow – even during long working days late into the night.
Additional tanks
The optional additional hoppers from Novag offer maximum flexibility when sowing. Up to two 120-liter hoppers can be added for precise metering of fine seeds, micro-granules or slug pellets.
The products can either be introduced into the air flow of the main tanks or applied separately – either in front of the openers to sow small seeds slightly covered, or at the rear, typically for slug pellet application.
Selective selection of openers
The Novag seed drill allows exceptional flexibility in the choice of active seed rows.
The sowing depth of each opener can be individually adjusted and also selectively switched on and off – for example every 2nd, 3rd or 4th row, ideal for rapeseed, soya or maize.
Twin Row
Double rows are also possible quickly and easily thanks to the hydraulic single coulter shut-off. This means, for example, that maize with a general coulter spacing of 18.75 cm can be sown with only 2 out of 4 openers.
This results in a double row, which has a center distance of 75 cm to the next double row.
Alternatively, there is IntelliRow, a Pseudo-singulation system which, with the additional tanks, ensures precise placement, especially of sugar beet and sunflowers.
Intelligence in every row
The Novag IntelliHead system takes seed distribution to a new level:
Each outlet from the distributor head is equipped with an electrically controlled flap. This allows individual selection of active openers and automatic shut-off of sections to avoid overlapping.
At the same time, the seed flow is monitored in real time, giving you a constant overview of the distribution.
The ISOBUS interface including Dynamic DDOP ensures full integration into common tractor systems – manual selection of any tramline switching is also possible without any problems.
Hydraulically driven dosing units
The T-ForcePlus 750 and the larger models use the IntelliCore+ Metering units.
It offers a selection of flexible metering rotors that are optimally matched to different seed and fertilizer grain sizes and sowing rates. Maintenance is particularly easy and the rotors can be changed in just a few simple steps, even when the hoppers are full.
The seed rate is adjusted to the speed in real time in order to precisely meet the target rate. Optionally, the seed rate can be adjusted on a site-specific prescription maps.
A powerful fan with integrated oil cooler and air preheater ensures optimum working conditions at any temperature.
Larger contact area – Less soil compaction
Soil-friendly tires
By optimally adjusting the tire pressure from road to field use, the weight is evenly distributed – and the ground pressure is significantly reduced.
Adapted tire pressure is crucial to avoid compaction. Although Novag does not offer a factory-fitted tire pressure regulation system, the axles are pre-drilled so that this useful system can be easily retrofitted.
Ballasting option – maximum performance on any soil
The Novag T-ForcePlus 750 can be optionally equipped with ballast weights in the wings for particularly tough conditions, such as in summer directly after harvesting.
Two 650 kg ballast plates can be mounted in each wing – a total of over 2.6 t of additional weight. These plates are easy to remove so that the machine can be optimally adapted to the ground conditions.
With full ballast, the maximum coulter pressure of up to 500 kg per openers can be guaranteed – ideal for hard or dry soils directly after harvesting.
Without additional weights, it works easily and gently on damp or soft surfaces.
Pseudo-precision system for row crops, maize / sunflowers
All technical details are also available as a PDF
| T-ForcePlus | 750 |
| Dimensions | |
| Working width | 7.2 and 7.5 m |
| Transport width | 3 m |
| Length incl. drawbar | 7.5 m |
| Transport height | 3.9 m |
| Unladen weight | 11 t |
| Optional additional weight | opt. 1,250 kg \ 2,500 kg |
| max. total weight | 17 t |
| Openers | |
| Row spacing | 18.75 \ 24 \ 25 |
| Number of openers | max. 36 |
| recommended power | > 300 HP |
| Coulter pressure | Is adjusted on each openers by a hydraulic cylinder, from 100 to 500 kg |
| Cutting disks | Hardened notched disks 575 × 5 mm or 520 × 5 mm |
| Openers | In pairs, cast iron NiHard optionally with carbide |
| Press wheels | 2 V-shaped Press wheels; semi-pneumatic 410 × 75 mm or 400 × 115 mm |
| Seeding depth | Fully adjustable in a range from 1 - 8 cm |
| Attachment | |
| Coupling | Towing eye, K80 Ball coupling or optional lower link hitch |
| Drawbar | Hydraulically adjustable drawbar |
| Metering units | |
| Type | Pneumatic system |
| Drive | Hydraulic drive with variable flow control |
| Seed and fertilizer hoppers | |
| Main double tank | 5.400 l |
| Adjustable partition wall | 3,000 l \ 2,400 l o. 1,800 l \ 3,600 l |
| Auxiliary bins | Optional, up to 2 × 120 l |
| Empty sensor | 2 capacitive sensors per hopper |
| Spreader heads front\rear | Optional, 4 \ 6 |
| IntelliRowPLUS | Optional, 50 \ 75 cm |
| Electronics | |
| auto. coulter pressure control | auto. Seed depth control, IntelliForcePlus system |
| Monitor and VRA | Optional: ISOBUS control or 7" monitor |
| Control openers | DW control unit or joystick |
| Seed flow monitoring | Optional, fully integrated in the monitor |
| Axle | |
| Track | 2,200 mm |
| Brake | pneumatic |
| Standard tires \ Tracks | up to 710 \ 50 R30.5 |
| Hydraulics | |
| Connections | LS system, 3 control units + Free return |
| Oil cooler \ Air heater | 1 |
| Hydraulic power requirement | > 80 l / min |
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationThe key to successful no-till
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information
